How to Remove a Stripped Screw? In the screws industry or the industry that has an intersection with screws, Stripped Screw is not a big deal. What’s more, the maintenance of home appliances will often encounter stripped screws. So what should I do if I encounter stripped screws? Do you feel helpless? Of course, in this case, we must try to use the stuff available around us to solve the problem. Here are some simple and convenient ways to solve the stripped problem. Hope you can help us when needed.
How to Remove a Stripped Screw
How to Remove a Stripped Screw
Put something on the screwdriver head, such as double-sided tape, non-woven fabric, etc. If there are no conditions, you can use paper, you can increase the friction!
Inject a small amount of 502 glue into the screw hole, then screw, and use needle nose pliers to unscrew the screw after the glue solidifies (the reason why no screwdriver is used is that it may cause the screw teeth to slip again), the glue must be completely hardened. (This operation is difficult, so be careful.)
If the screw head is exposed, you can clamp the screw cover with needle nose pliers and unscrew it.
It is also possible to cut off the screw cap, disassemble the shell and then process → be professional!
Generally, the screws of mobile phones are metal, and the shell is plastic. When it can’t be unscrewed, you can insert a sharp welding head into the screw cap, heat the metal screw to melt the plastic around the screw, hold it with sharp pliers, and gently pull it out! You can also press down the screw about 1mm (be careful not to pass through the casing), which can solve the problem of loose screws
Such a small screw is really difficult to handle. (Method of repairing bicycle screws) Use a small electric drill to drill a hole in the middle of the screw of the flower, and then find a tap with a reverse thread (the tap is hard to find, you have to go to a large measuring tool shop), and you can unscrew it.
Drill out with a power drill.
On the gas stove, burn the head of the screwdriver red, then quickly press it on the screw, wait for about 5 seconds, and then you can screw it out.
After heating with a soldering iron, put it on the used screw head for too long until the screw can be tightened. You can find some scraps to practice the feel first, which is the safest way to dismantle.
Grind the edges with a flat screwdriver and start screwing.
Hang the molten solder on the torch head. After the screwdriver and the screw are aligned, turn on the solder and open the screw after cooling down.
Use an electric drill to knock off the gong cap. Use the reverse thread principle to drill out the remaining screws (you can use the broken head screw – the special drill bit for the broken head screw extractor)
The repairman uses a large screwdriver to make three strokes, five strokes, and two. He told me to use the screwdriver from small to large. Of course, I’m not asking you to change screwdrivers often, but it’s easy to spend too much at the beginning, and it’s easy to spend a little at the beginning. Large-sized screwdrivers only come out after the screws are spent.
Use a small needle nose pliers to pull it out alive~
Use a soldering iron to scald the solder on the slipped screw, then dip it with a screwdriver, and wait for the solder to dry before rotating.
The newly discovered super method uses a knife to repeatedly carve on the screw until the Phillips screw is carved into a wood screw, and then it can be disassembled, which takes about 10 minutes.
Each of the methods for solving screw stripped described above has its own application environment. The tools at hand are different, and the methods used are also different. How to Remove a Stripped Screw Here, Heatfastener just briefly introduces a few common and simple methods. If any problems, or any needs, please welcome to contact us.
Need Custom Screws for Your Industry?
As a 20-year industry experience manufacturer with a factory equipped with precision machines, we can provide, from consultation to production, a one-stop solution for you.
