Remaches Pop

Fabricante de remaches a medida

Termofijador

Pop Rivet Supplier

Heatfastener is a pop rivets supplier and manufacturer for all your rivet needs. We carry blind rivets, semi-tubular rivets, and solid rivets. plastic rivets, hollow rivets, male and female rivets, Besides the rivets themselves, we also supply the tools to help you install the rivets.  We offer hand rivet tools, plastic rivet tools, and air/hydraulic tools as well. We supply more than just rivets, we also supply rivet nuts in many different styles. We offer more than just off-the-shelf rivets. We also manufacture custom rivets.

Pop Rivet Types

  • Domed head rivets
  • Countersunk head rivets
  • Sealed rivets
  • Large flange rivets
  • Peeled head rivets
  • Grooved rivets

.

Pop rivets

Pop Rivets Specifications

A blind rivet is a rivet that can be completely installed from one side, unlike machine screws and nuts, which require access to both sides of the material. Blind rivets are also known as “pop” rivets because POP® is one brand of blind rivets.

Blind pop rivet fastening systems are extremely versatile and are mainly used in applications where access to the rear or blind side of the joint does not exist. Pop rivets are manufactured with a two-piece construction design; the first is the rivet body or the shell and the other is the stem or mandrel. Both parts are pre-assembled and ready to use. Fastening is done by using a special tool to draw the mandrel which causes the body to deform and clamp the joint. Once the designed clamping force is reached, the mandrel snaps and is discarded.

Pop rivets stainelss steel
Blind rivet

Pop Rivet Application

POP Rivets have a widely application just if they are properly installed. Most of them are used in RVs, Trailers, Aircrafts, Machinery, Jeans, Small Electronics, Structural Beams, Battleships and Submersibles.

To use a blind rivet, a hole is drilled then the rivet is seated inside of the hole. Then a tool pulls the mandrel against the hat of the rivet. The back of the mandrel either has a bulge on the end or is connected to the hat in some way which makes the edges of the hat expand down towards the material. Once this expansion reaches the material and builds pressure, a designed fault in the mandrel reaches its peak force capacity and snaps. Leaving a properly installed rivet.

Pop rivets have a lot of advantages includes cost-effective, allowing for joining of parts when there is limited rear access, durable,and lighter than screws and bolts, depending on material

They are used to make high-strength joints in a range of materials, including metals, plastics, wood, and leather. Typically, the process is used for joining plastic or sheet metal.

To enable pop rivets to meet the requirements of a wide variety of applications, they are available in many materials, including:

  • Aluminum-1100:Commercially pure aluminum for extremely soft or brittle materials; for lower shear/tensile requirements
  • Aluminum-5052:Best used where shear&&tensile is required;good corrosion resistance
  • Aluminum-5056:Best used where higher shear&tensile is required; good corrosion resistance
  • Aluminum-5154:Used for special products/applications
  • The steel-C1002-C1010:General purpose used: used for all steel rivet mandrels
  • Stainless steel-300 Series: Austenitic stainless steel: offers good corrosion resistance
  • Nickel Copper Alloy-400:Offers extremely high corrosion resistance; has excellent elevated temperature properties
  • Copper-110:Used where electrical conductivity is required
Pop rivets titanium

Otros elementos de fijación Le puede interesar

¿Necesita remaches a medida para su sector?

Como fabricante con 20 años de experiencia en el sector y con una fábrica equipada con máquinas de precisión, podemos ofrecerle, desde la consulta hasta la producción, una solución integral.

Póngase en contacto con nosotros

¿Busca fabricantes de tornillos?

Servicio en línea 24 horas

Preguntas frecuentes

Comprised of a rivet and an integrated mandrel, blind rivets are installed in a tight hole that passes through whatever material you’re riveting. A riveter is then used to pull the mandrel back while holding the rivet in place.

What is a Blind Rivet? A revolutionary fastener, the blind rivet is so named because it can be installed when you don’t have access to—or can’t see—the back side of the item being riveted

For typical workshop applications, where pop rivets are usually used, threaded fasteners will provide superior strength. Pop rivets use a hollow shaft, reducing their ability to resist shear loads. The strength of the materials used also depends on the power of riveting tools available.

Closed End Pop Rivets are often referred to as sealed blind rivets, or sealing rivets because they create a watertight seal when installed properly, making them a popular item in the boating and automotive industries.

There are a number of alternatives to rivets, including welding, brazing, nuts and bolts and adhesives. These are all ways of either permanently or temporarily fastening materials together.

The length of the rivet should be equal to the thickness of both objects you are fastening, plus 1.5 times the diameter of the rivet’s stem. 3/32” (2MM) FOR UP TO 3/32” (2MM) THICKNESS.

Blogs