Aluminum Countersunk Rivets
We’re a leading manufacturer of specialty fastening solutions for demanding industrial applications. Our area of expertise is custom countersunk rivets manufactured from high-quality Aluminum,stainless steel,and etc materials.
Heatfastener offers a full line of countersunk rivets for all of your rivet needs. Our countersunk line includes solid, semi-tubular, and blind rivets. We offer both off the shelf solid and semi-tubular rivets and specials made to fit your exact needs. We can make semi-tubular and solid rivets starting at 1/32 in diameter all the way up to 3/8.
Heatfastener is a professional custom fasteners manufacturer and supplier, not only screws but also bolts and other fasteners. Material can be stainless steel, carbon steel, titanium, or aluminum. etc. Metric and Inches are available. Non-standard sizes, materials, and finishes are available to order as specials
Countersunk rivets are also known as flat rivets and are used in countersunk holes. These types of rivets are commonly used on sliding tracks as they sit flush with the surface, which means the head doesn’t protrude when set in place.
Countersunk rivets are a part that uses its own deformation or interference to connect the riveted parts in riveting. Countersunk head rivets are widely used in automobiles, vehicles, mechanical and electrical products, building decoration, and household appliances. It is used for occasions where the strength requirements are not high, the thread diameter is less than 10MM, and the rivets are screwed in and fastened. All or part of the screw head sinks into the connected piece, and this structure is mostly used in occasions where the surface is flat and smooth, such as the surface of an instrument
Rivet nuts have an advantage over other captivated fasteners because they can be installed on-site or used for repair work to replace a previously installed fastener that has failed. The advantage of installation from one side of the application means that access to the back of the panel is never required. countersunk head rivets include solid rivets, semi-tubular, and blind rivets.
- Solid rivets: These simple devices consist of a solid shaft with a head on one end; once installed, the headless end of a solid rivet is deformed with a hammer or rivet gun to hold it in place. Perhaps the most widely-used style of rivets, solid rivets is utilized in applications where reliability and safety are important.
- semi tubular rivets: Semi-tubular rivets (also known as tubular rivets) are essentially the same as solid rivets, but with a shallow hole at the tip, opposite the head. This hole causes the tubular portion of the rivet (around the hole) to roll outward when force is applied.
- Blind Rivets: Pop rivets, also known as blind rivets, are a type of rivets. They are used in applications where it is limited – or no – access to the rear side (blind side) of the parts to be joined
Need Custom Screws for Your Industry?
As a 20-year industry experience manufacturer with a factory equipped with precision machines, we can provide, from consultation to production, a one-stop solution for you.
Are you looking for screw manufacturers?
24hours online Service