Heatfastener
Standoff Screws
Supplier
Heatfastener is a standoff screws manufacturer and supplier with 23years of experience, we are a young and creative team with nearly 230 employees, Human resources is the most core value and most valuable wealth of Heatfastener company, there are many undergraduates from key universities and senior technicians who have worked in this industry for more than 10years, resources is also the power of sustainable development of Heatfastener
With ISO9001:2008,iso14001:2004, and especially IAFT16949:2009 certification for the automotive industry. Heatfastener offers fully customized custom bolts and screws according to your needs. We can bring your fastener design to reality, and everything according to your requirements.
Standoff Screws Details
Standoff screws are double-ended threaded fasteners used to set a distance between two parts. Typical standoffs (from left to right): female/female, male/female, and male/male. A standoff is a threaded fastener used to hold two parts a set distance apart.
Does that utilize standoffs? A standoff appears like a made complex variation of a screw, as well as its type of is. It’s a separator that’s threaded. They are available in various sizes to ensure that you can elevate one product over an additional one. They include a wall screw, barrel, as well as cap, as well as they’re normally made from nylon(plastic), brass, copper, or lightweight aluminum. Their form can differ, yet they’re normally hex-shaped, so they can be tightened up by a wrench, or round. They likewise have various kinds that are gendered to make sure that they can fit together. They are made use of for a selection of factors yet are frequently seen in the electronic devices and also show sectors. Standoffs are typically lumped together with one more kind of attaching device: spacers. Although they are often made use of on the exact same item of digital devices, both are fairly various. A spacer is an unthreaded item of tubes. The tubes permit a whole screw to go through. Unlike a standoff, a spacer can not be tightened up, so they are typically a rounded form.
Standoffs come in a variety of diameters and lengths. We carry them in coarse and fine thread. Listed below are the diameters we carry for all of our custom screws, custom bolts, and other custom fasteners:
Materials:
- Stainless steel – SS302, SS304, SS316, (good tenacity),Stainless steel A2 A4
- Steel – C45(K1045), C46(K1046),C20
- Brass – C36000 ( C26800), C37700 ( HPb59), C38500( HPb58),C27200CuZn37), C28000(CuZn40)
- Bronze–C51000, C52100, C54400, etc
- Aluminum – Al6061, Al6063 etc
- Carbon steel – C1006,C1010,C1018,C1022,C1035K,C1045
- Alloy steel – SCM435,C10B21,C10B339
- Other material– Titanium, UNS C11000 Copper,silicon
Others:
- Grade: Grade 4.8,Grade 6.8,Grade 8.8,Grade10.9,Grade12.9 etc
- Standard:GB,DIN,ISO, ANSI/ASTM,BS,BSW,JIS, Metric, Inch
- Finish:Plain, H.D.G, Black oxide, Chrome, Teflon,dacromet,Anodized,With nylok
- Certificates: ISO9001:2015, ISO14001:2015,IATF16949, ROHS
- Non standards:OEM is available,according to customer requirments
Head type&Drive Type
- Head Type:Flat, Oval, Binding, Pan, Round, Truss, Button, PF,Cheese,Fillister, Pan Washer, Cylinder,Hexagon, Indented Hexagon,Washer
- Drive Type:Phillips, Slotted, Phiilips/Slotted, 6 Lobe, Pin 6 Lobe, Pozidrive, Square, Triangle,Y type. Tri-wing, S-type, H type, Hexagon, 5 Point,8 point, Spline, Spanner, Clutch, Hex pn,torx pin
Application
standoffs are used for sign mounting, they are just a simple and small piece of hardware that is used to attach the sign to the wall and secure it. Standoffs are used on acrylic signs and aluminum signs to give a high-end feel to the signage.
The other standoff screws most common use for standoffs is in electronics. When people assemble circuit boards, they use both spacers and standoffs as they are the standard for mounting and connecting circuit boards as well as gears, panels, and doors of electronics. Using standoffs allows for the pieces to be elevated above one another, reducing the chances of contact. Having these parts separated keeps them from short-circuiting.
Standoffs can come in three genders: female-female, male-female, and male-male. Female-female standoffs can be either partially or fully threaded on each end. Male-female standoffs are composed of female threads internally on one end and male threads on the other end. The threads for these are typically the same size
Advantage of our standoff screws
- Uniform stree byth standard,screw teeth more sharp and not easy to slip
- Full automatic process with advanced equipment, to ensure the processing density of copper, copper refining app earance Exqusite workman ship
- Six corresflat,smooth surface,using high quality stainless steel processing conforn,to make precision
We can manufacture custom standoff screws as per the customer’s requirement. below is one of the sizes we made.
Noted:1.L<100(MM) 2. As this product does not currently have c corresponding national standard, and the company standard is not the same, the above specifications are for reference only.3. Custom standoff screws are available
Screw Thread(d) | Screw Thread(d) | M2.5 | M3 | M4 | M5 | M6 | M8 | ||||
---|---|---|---|---|---|---|---|---|---|---|---|
P | pitch | 0.45 | – | 0.5 | – | 0.7 | 0.8 | 1 | 1.25 | ||
D | Nominal Diameter/UN | 4# | – | 6# | – | 8# | 10# | ||||
PP | UN | 40 | 32 | 32 | 32 | ||||||
Norminal Size | 4 | 5 | 5 | 6 | 6 | 7 | 8 | 8 | 10 | 12 | |
s | MIN | 3.9 | 4.9 | 4.9 | 5.9 | 5.9 | 6.9 | 7.9 | 7.9 | 9.9 | 11.9 |
MAX | 4.1 | 5.1 | 5.1 | 6.1 | 6.1 | 7.1 | 8.1 | 8.1 | 10.1 | 12.1 | |
L1 | min | 6 | 6 | 6 | 6 | 7 | 7 | 8 | 8 | 10 | 12 |
Nominal size | 6 | 6 | 6 | 6 | 7 | 7 | 8 | 8 | 10 | 12 | |
L2 | min | 5.9 | 5.9 | 5.9 | 5.9 | 6.9 | 6.9 | 7.9 | 7.9 | 9.9 | 11.9 |
max | 6.1 | 6.1 | 6.1 | 6.1 | 7.1 | 7.1 | 8.1 | 8.1 | 10.1 | 12.1 |
Need Custom Standoff Screws for Your Industry?
As a 20-year industry experience manufacturer with a factory equipped with precision machines, we can provide, from consultation to production, a one-stop solution for you.
About Us
Shenzhen Heat Hardware Co., Ltd is a leading custom screw manufacturer in China founded in 2000 years. We are specializing in custom screws, security screws, Sems screws, Chicago Screws, Weld Screws, Long screws, Micro Screws, Thumb Screws, Set Screws, Custom bolts, carriage bolts, nuts, and other custom Fasteners. With more than 20years of industry experience. We have serviced over 20000customers including the aerospace industry, automotive industry, electronics, mechanical and electrical products, robots, the Medical industry, communications industry, Outdoor sports products, smart appliances, etc. we can provide one-stop fastener customized service for you no matter what kind of custom fastener you need.
Frequently Asked Questions
Related Custom Screws
Contact Us
Are you looking for screw manufacturers?
24hours online Service
Blogs